Cosworth, the very same company that designed and built the incredible YB engine 30 years ago, have created these aftermarket Cosworth YB 10:1 piston sets for the ultimate in performance and reliability. Each set contains four Cosworth pistons, plus high strength gudgeon pins and clips along with high performance compression and oil control rings.
The pistons are forged in-house at Cosworth from 2618 high tensile strength aluminium alloy. Cosworth use a forge tool that is designed specifically for this piston to give the best grain flow in the most highly stressed areas. Cosworth then machine, inspect and pack the pistons, exclusively for Modatek.
Piston Design Features
There are so many features that Cosworth have included with these pistons, its hard to know where to begin!
Starting on the crown, each Cosworth YB 10:1 piston comes with valve pocket cut-outs are already machined. The crown is flat to give the correct combustion volume that then gives a compression ratio of 10:1. Once the crown is machined, it is then brightly polished to reduce carbon build up.
Next, we have a couple of features that are designed to keep control of the piston rings. Above the ring grooves are Cosworth’s unique patented anti-detonation bands. These bands protect the top ring by disrupting any high-pressure pulse waves from pre-ignition and detonation. In between the compression rings grooves is an accumulator groove. This groove reduces the pressure on the top ring’s lower face to reduce unwanted ring flutter. It also reduces the pressure on the second ring, helping the rings to seal better.
The oil control ring groove includes an array of oil drain holes. Any oil that is scraped by the rings from the wall of the cylinder bore can drain back through these passageways into the crankcase or sump. These holes help to stop oil from building up behind the ring, which would otherwise find its way up past the rings and into the combustion chamber, creating unacceptable levels of oil burning.
On the skirt below the ring grooves is a xylan anti-friction coating that provides excellent wear resistance, and gives the skirt a very low surface friction to help reduce any frictional losses. The skirt shape is comprised of a smooth blended barrel form with an optimised profile specifically designed by Cosworth.
Finally, the gudgeon pin bore is offset by 1.0 mm to reduce the thrust loads on the skirt, which in turn reduces piston skirt wear and engine noise.
Bore Size Options
These Cosworth YB 10:1 piston sets are available in three bores sizes, just choose from the pull-down button. The three sizes are:
- Standard bore (90.82 mm) = set no 20071269
- +0.50 mm oversize (91.32 mm) = set no 20071270
- +1.00 mm oversize (91.82 mm) = set no 20071271
- Compression ratio = 10:1
- Pin diameter = 24.0 mm
- Ring widths = 1.50 mm top ring, 1.75 mm 2nd ring & 3.00 mm oil control ring
We also stock these piston sets with 8:1 compression ratio crowns, see 10001422/10001423/10001424 YB 4WD 8:1 PISTON SET for more details.